Hardware Resources - Hinges - 1/2" Overlay 1 Piece Face Frame Hinge with Overlay Adjustment with Dowels in Nickel

Q&A

1. Q: Are these for a 1/2 inch thick faceframe?
   A: These will work on a standard 3/4" thick door. The overlay is a 1/2" Was this answer useful to you? Yes (0) No (1) Yes (0) No (1)
2. Q: Are these soft close hinges?
   A: This hinge is not soft closing. Was this answer useful to you? Yes (1) No (0) Yes (1) No (0)
3. Q: Will these hinges work with partial inset cabinet doors?
   A: These will not work on an inset they are for overlay cabinets Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
4. Q: I know mounting screws are not included. However, I don't quite understand the purpose of the two screws with the plastic covering? Are we to pull those out and replace them with the our mounting screws? Are there any instructions on how to mount these?
   A: The dowel feature help to make an ideal replacement for missing hinge screws. Click here for installation instructions Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
5. Q: Can these be used with 1 1/4” (aka 5/4”) thick doors?
   A: We would suggest ordering a sample to view in the comfort of your home prior to placing a complete order. Was this answer useful to you? Yes (2) No (0) Yes (2) No (0)
6. Q: Can l get this Hinge in stainless steel?
   A: This specific hinge is currently not available in a stainless steel finish. Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
7. Q: My cabinet doors are 3/4 thick MDF. Will these hinges work with my doors. Model 3396-000
   A: The hinge will accommodate the standard 3/4" inch door. Was this answer useful to you? Yes (0) No (0) Yes (0) No (0)
8. Q: Distance between 2 mounting holes?
   A: Please click here for the specifications.  Was this answer useful to you? Yes (2) No (0) Yes (2) No (0)
9. Q: Is this hinge self closing?
   A: The hinge is self-closing.  Was this answer useful to you? Yes (4) No (0) Yes (4) No (0)
10. Q: How are these hinges installed?
    A: 1. Open and place the hinge into the boring pattern 35mm hole - two locations per door 2. Install (2) #6 x 1/2” flat head screws into the 8mm doweled holes 3. Repeat (step 2) for second hinge 4. Hold cabinet door perpendiular to cabinet frame and index both hinges on leading face frame edge 5. Install (1) #8 5/8” pan head screw through each hinge into the face frame 6. Close cabinet door to cabinet face 7. Check what adjustments need to be made Was this answer useful to you? Yes (0) No (4) Yes (0) No (4)